STN
Multi Channel Signal Classifier, Demodulator
and Decoder System is PC-based 4-channel Automated
Signal Analyzer (2 full duplex), Demodulator
and Decoder for narrowband Analog-Digitally
modulated signals. The system comes with an On
Line Modulation and Coder Classifier, which
automatically classify the modulation and coding
schemes used in the Signal. On determination
of these parameters, the system automatically
implements the required demodulator and decoder
to provide the required Voice- Fax or Data. The
PC Signal Analysis can be used in an offline
mode too.
Features
Four channel analysis, demodulation, and processing of narrowband digitally modulated COMINT signals (20Hz - 20kHz).
Interactive determination of modulation type and bit stream analysis.
Automatic signal classification for on-line demodulator setting and speeding up interactive off-line analysis.
Robust demodulation of single & multi-carrier ASK, FSK, MFSK, PSK, Hybrid, QAM16, various CCITT- / ITU-variants and OFDM.
Numerous resident standard decoders plus special decoders on request.
Generator for ASK, FSK, MFSK, PSK, Hybrid, QAM16, various CCITT- / ITU-variants and OFDM.
Automated classification of speech (yes/no).
Audio monitoring (listen-in) and noise reduction facilities.
Signal recording to hard disk.
COTS professional audio I/O for narrowband signal acquisition.
STN
Multi Channel Signal Classifier, Demodulator
and Decoder System is PC-based 4-channel Automated
Signal Analyzer (2 full duplex), Demodulator
and Decoder for narrowband Analog-Digitally
modulated signals. The system comes with an On
Line Modulation and Coder Classifier, which
automatically classify the modulation and coding
schemes used in the Signal. On determination
of these parameters, the system automatically
implements the required demodulator and decoder
to provide the required Voice- Fax or Data. The
PC Signal Analysis can be used in an offline
mode too.
