The static stations allows the user to intercept, monitor radio networks in the HF/VHF/UHF bands and localise the transmitters.

The H/V/UHF Monitoring and DF System can be used in various scenarios depending up on the mission requirement. This system is deployed at a static location to intercept the traffic in that general area. The system can be left unattended for prolonged durations and the system records the signals in that area.
The recorded I&Q data can be sent to a centralised control and analysis station through an existing communication network or can be copied and sent to the analysis station for offline analysis. Multiple of such static or mobile stations can be connected to a central database for storage and analysis purposes. Stratign also offers a fully Automated Spectrum Monitoring System (ASMS) which allows for networking of all Monitoring and DF Stations and are centrally tasked and controlled from a Control Station. This helps in carrying out radio spectrum analysis over a complete zone or even the country.
The operation of the system does not require deep knowledge of the radio communication and provides an excellent platform to intelligence agencies for obtaining valuable data intelligence from radio networks which are used by criminals and terrorists.
Radio Static

System Features

Panoramic Spectrum Analysis
Panoramic spectrum analysis within the entire operating frequency range (0.009 – 8000 MHz) or within separate intervals in complicated electromagnetic environment.
Frequency Hopping Signals
Demodulation of AM, SSB, FM signals and Decoding of TETRA, DMR, DPR, DpMR, NXDN P25, etc. signals.
Frequency – Time Diagram
Plotting frequency-time diagram within analysed frequency ranges.
Measuring of electromagnetic field strength and signal parameters.
Automatic Direction Finding
Automatic direction finding of radio emission sources with random modulation types and spectrum width in single-channel and multi-channel modes.
Real-time Display
Real-time display of bearings, spectrum panorama, bearing history and signal amplitude history.
Bearing Panorama
Building of bearing panorama within operating frequency range.
Technical Analysis
Technical analysis, including revealing of central frequency, signal type, modulation type, signal bandwidth.
Postprocessing Mode
Accumulation of data for further analysis in the postprocessing mode.
Selective DF
Selective direction finding of signals of GSM, UMTS, LTE base stations.
Frequency Hopping Signals
Detection and direction finding of frequency hopping signals (up to 1500 hops per sec).
Display of Bearings
Displaying bearing to a radio emission source in electronic map.
Integrated Electronic Map
Mapping DB information on the electronic map.
Remote Operation
Remote control based on TCP/IP via wire and wireless communication channels.
Frequency / Time Parameters
Check of frequency/time parameters and service information of base station of modern communication and data transmission systems (GSM, IS-95, cdma2000, EV-DO, UMTS, TETRA, DECT, LTE, DMR, APCO P25, dPMR, NXDN).
System Synchronization with GPS / GLONASS Signals
Synchronize system stations based on GLONASS/GPS signals while working in integrated mode for synchronous DF and LF of radio signal sources.
Transmitter location evaluation based on direction finding data (triangulation).
TDOA Capability
Transmitter location evaluation based on TDOA method.

Know More

Download Brochure